Ghost Rider halloween costume 🤯 #happyhalloween #halloween #pumpkin #ghostrider
[Music] this guy created a 3D printed Halloween mask for his costume and then set it on fire on purpose once he had the mask printed he painted it with a textured coat and added a burnt effect around the edges to ensure it was safe to light up he treated the outside with a clear fireproofing layer and coated it with a high temperature silicone mix which can handle extreme heat as a backup he wore a ski mask beneath the helmet covered in a similar fireproof material for added insulation he even used dried pineapple skins which are surprisingly fire resistant thanks to their thick skin and high water content an unusual but clever choice for the grand effect he attached a ring of fire around the back of the Mask The Creator Tyler satari is on all platforms so check him out imagine spotting him trick-or-treating down the street there’s no missing Tyler in that flaming mask
この男は、コスチューム用に 3D プリントのハロウィーン マスクを作成し、それを燃やしました。それは意図的でした。マスクを印刷したら、テクスチャー コートでペイントし、エッジの周りに焼けた効果を追加しました。安全に点灯できるようにするために、外側を透明な耐火層で処理し、極度の熱に耐えられる高温シリコーン混合物でコーティングしました。予備として、彼はヘルメットの下に同様の耐火性素材で覆われたスキーマスクを着用した。断熱性を高めるために、彼は乾燥させたパイナップルの皮も使用しました。パイナップルの皮は厚い皮と高い水分のおかげで驚くほど耐火性があります。これは珍しいですが賢い選択です。壮大な効果を得るために、彼はマスクの後ろの周りに火の輪を取り付けました。作者の Tyler Satari はすべてのプラットフォームに登場しているので、ぜひチェックしてみてください。通りでトリック・オア・トリートをしているタイラーを見つけたところを想像してみてください。その炎のマスクをかぶったタイラーは見逃せません。
MAG.MOE - The MAG, The MOE.